One of the best things about Epilog's laser engraving/cutting systems is that, in addition to customizing ready-made products, operators can also use this versatile tool to cut and create one-of-a-kind objects from scratch - often times using scrap material! In this sample club we're providing different files as inspiration to create your own custom awards from a all kinds of substrates.
These award designs are fully customizeable and can work on a variety of materials. Use your imagination and modify as you like to bolster your award sample selection!
Kami menggunakan Fusion M2 32 75-watt dengan pengaturan berikut:
Acrylic Cutting: Vector | Speed 1% | Power 100%
Wood Engraving: Raster | Speed 40% | Power 100% | DPI 600 | Standard
Open the file and arrange the graphics to the size of your material. Adjust the print settings according to the material and send artwork to the laser.
Insert the material into the system and move to the upper left corner of the table. Next, run the vector outline (remember to have the red dot pointer on and leave the lid open) to ensure your placement is where you want. Once you're satisfied, send the job to the laser and press go!
Apply acrylic cement or mix media glue to hold your pieces together. Use a clamp to help the materials set in the correct position.
Kami akan mengirimkan kepada Anda sebuah brosur beserta sampel yang diukir dan dipotong yang dibuat dengan laser.
Buka Klub Sampel lengkap kami untuk lebih banyak ide tentang apa saja yang dapat Anda buat dengan sistem laser dari Epilog.
Lihat lini lengkap sistem pengukiran dan pemotongan laser Co2 dan Serat untuk melihat mana yang tepat untuk Anda.
2019 © Epilog Laser. Hak Cipta Dilindungi Undang-undang Kebijakan Privasi | Pilih Negara Anda | Peta Situs